Green Energy Experts Solution Private Limited

Overview Quick Details

India Brand Name:         HIGHSTAR

Model Number:               3.2V 100Ah

Battery Type:                   LiFePO4

Battery type::                   3.2V 100Ah

Discharge Current::        3C

Components:                   22X13X4 cm Cell

Voltage::                             3.2 VLFP cell voltage

Cell Capacity::                  100AH 

package size:                    22X13X4 cm

Single gross weight:        2.500 kg

Get best price for Highstar Prismatic Battery Cell 3.2V LifePo4 100Ah Lithium Iron Phosphate Cell

Overview Quick Details

India Brand Name:         HIGHSTAR

Model Number:               3.2V 100Ah

Battery Type:                   LiFePO4

Battery type::                   3.2V 100Ah

Discharge Current::        3C

Components:                   22X13X4 cm Cell

Voltage::                             3.2 VLFP cell voltage

Cell Capacity::                  100AH 

package size:                    22X13X4 cm

Single gross weight:        2.500 kg

Get best price for Highstar Prismatic Battery Cell 3.2V LifePo4 100Ah Lithium Iron Phosphate Cell

A 3.7V Li-ion Rechargeable Battery is one of the most common lithium-ion cells used in portable electronics, power tools, e-bikes, and many other applications. The nominal voltage of a single lithium-ion cell is approximately 3.7 volts, with a fully charged voltage around 4.2V.

• High energy density — lightweight with good capacity.

• Low self-discharge rate — holds charge well when unused.

• Requires proper charging — CC (constant current) then CV (constant voltage) charging method.

• Sensitive to overcharge, over-discharge, and high current — protection circuits (BMS) recommended.

• Used in battery packs by connecting multiple cells in series/parallel.

• Smartphones, tablets, laptops

• Power banks and portable chargers

• Electric bikes and scooters

• Wearables and small electronics

• DIY battery projects

• Use dedicated Li-ion chargers with proper CC-CV profile.

• Avoid overcharging (>4.2V per cell) and deep discharging (<2.5V per cell).

• Always use Battery Management System (BMS) or protection circuit modules.

• Store batteries in cool, dry place; avoid extreme temperatures.

High star prismatic cell 100Ah 3.2V.  Prismatic LiFePO4 Battery has been widely used for energy storage systems, and Electric vehicles.

Product Specification

JBD BMS 8 to 24S 40A SMART BMS
The DMEGC Cylindrical Lithium-ion 18650 Cell is a high-performance, rechargeable lithium-ion battery with a 2600mAh capacity and a 3.65V nominal voltage. Designed for high energy density, long cycle life, and stable performance, this cell is ideal for portable electronics, power tools, electric vehicles (EVs), energy storage systems, and custom battery packs.

• Do not dispose off in fire.
• Do not short circuit the terminals.
• Charge every 30 days if idle
• Warranty void if label tampered 
• Charge with Lithium ion charger only

• High functionality
• Rechargeable
• No ‘memory effect', providing a complete charge with each cycle

Protection:

• 1S BMS installed with the battery pack and protects the battery from
• Overcharge (>4.2V)
• Over-discharge ( <2.5 V)
• Over drain ( >3.0 Amp.)
• Short circuits
• No polyswitches

Good quality of battery pack for Scooty battery

A lithium-ion battery is a type of rechargeable battery that is charged and discharged by lithium ions moving between the negative (anode) and positive (cathode) electrodes.

A Lithium-ion cell (or Li-ion cell) is a type of rechargeable battery commonly used in portable electronics, electric vehicles (EVs), and renewable energy storage systems due to its high energy density, low self-discharge, and relatively long cycle life.

A typical Li-ion cell has three main components:

1. Anode (Negative Electrode):

   • Usually made of graphite.

   • Stores lithium ions during charging.

2. Cathode (Positive Electrode):

   • Made of a lithium metal oxide, such as:

     • Lithium Cobalt Oxide (LiCoO₂)

     • Lithium Iron Phosphate (LiFePO₄)

     • Lithium Nickel Manganese Cobalt Oxide (NMC)

3. Electrolyte:

   • A lithium salt (like LiPF₆) dissolved in an organic solvent.

   • Allows lithium ions to move between the anode and cathode.

4. Separator:

   • A thin, porous membrane that prevents physical contact between the anode and cathode while allowing ion flow.

• During Discharge (Powering a Device):

  • Lithium ions move from the anode to the cathode through the electrolyte.

  • Electrons flow through the external circuit, powering the device.

• During Charging:

  • An external power source forces lithium ions to move from the cathode back to the anode.

  • Electrons also flow back into the anode via the external circuit.

• High energy density

• Lightweight and compact

• Low self-discharge

• No memory effect

• Long cycle life

A Lithium-ion cell (or Li-ion cell) is a type of rechargeable battery commonly used in portable electronics, electric vehicles (EVs), and renewable energy storage systems due to its high energy density, low self-discharge, and relatively long cycle life.

A typical Li-ion cell has three main components:

1. Anode (Negative Electrode):

   • Usually made of graphite.

   • Stores lithium ions during charging.

2. Cathode (Positive Electrode):

   • Made of a lithium metal oxide, such as:

     • Lithium Cobalt Oxide (LiCoO₂)

     • Lithium Iron Phosphate (LiFePO₄)

     • Lithium Nickel Manganese Cobalt Oxide (NMC)

3. Electrolyte:

   • A lithium salt (like LiPF₆) dissolved in an organic solvent.

   • Allows lithium ions to move between the anode and cathode.

4. Separator:

   • A thin, porous membrane that prevents physical contact between the anode and cathode while allowing ion flow.

• During Discharge (Powering a Device):

  • Lithium ions move from the anode to the cathode through the electrolyte.

  • Electrons flow through the external circuit, powering the device.

• During Charging:

  • An external power source forces lithium ions to move from the cathode back to the anode.

  • Electrons also flow back into the anode via the external circuit.

• High energy density

• Lightweight and compact

• Low self-discharge

• No memory effect

• Long cycle life